burnt
12-12 03:39 PM
No questions asked about visa or 485. Just had to show my passport and AP document :)
Thanks for the response. My wife has started working on EAD. So when she comes back, will she have to enter on AP? And as you said, they would not ask for I-485 receipts...Correct? I don't have I-485 receipts and I am just scared that if they ask for it, and I don't have it, then what happens...
Do you know of someone who was asked for the I-485 receipts on their way back?
Thanks for the response. My wife has started working on EAD. So when she comes back, will she have to enter on AP? And as you said, they would not ask for I-485 receipts...Correct? I don't have I-485 receipts and I am just scared that if they ask for it, and I don't have it, then what happens...
Do you know of someone who was asked for the I-485 receipts on their way back?
wallpaper living room decoration
rb_248
04-10 04:39 PM
How many for MSFT + Infy ?
gparr
November 25th, 2005, 04:38 PM
My primary tip is patience. When the wind is blowing, even slightly, if you're patient you will start to get in tune with the wind and be able to pick out the calm moments that always occur. You just have to be ready and then get off as many shots as possible during that calm moment. I shoot as many of my flower shots as I can very early or very late in the day. By very early, I mean at or just after sunrise. The wind is usually calm for a short while until the sun starts to heat the admosphere. I've had considerable success shooting in the very soft light at or after sunset, when the wind also calms. Long shutter speeds though. Unfortunately, too many blooms aren't open until the sun is higher in the sky and you have to resort to patience.
I've also had great success with a trick Don Bevis shared. You can get thin bamboo sticks in bundles for just a couple of dollars at your local nursery. Get the longer ones. I always carry two of them with me and stick them in the ground so that they apply slight pressure to the plant stem. This cuts down considerably on the movement. Don't know where Don learned the trick, but it works.
Some use a tool called a Plamp. See it here (http://www.naturephotographers.net/gs/gswimplamp.html) I've never used one, though have been tempted. The fear I have is that any clamping device will damage the plant. I shoot a lot in the gardens of several neighbors and at the Chicago Botanic Garden and make it a point to never leave any trace of my having been there. In other words, no footprints in the flower beds, no damaged plants, nothing. Don's trick works so well because it steadies the plant without causing any damage. It doesn't always work, but it does so often enough that it's worth hauling the sticks around.
I've also read several threads on other sites where people describe using "tents" to both diffuse the light and to stop the wind. I don't have any links for solid techniques, but will try to find some. It's tempting, though yet another piece of gear to carry.
These days I make heavy use of my 5-in-1 disk for diffusion and reflection. I have the 22-in. Photoflex Multidisc (http://www.bhphotovideo.com/bnh/controller/home?O=breadCrumb&A=search&Q=&ci=6196), which I like a lot. It's excellent for a lot of light control purposes and sometimes serves as a good wind block. There are cheaper ones, but Kevin Sadler talked me into spending more money to get a quality product and I haven't regretted it.
When all else fails, I resort to flash to get the shot. I greatly dislike using flash and only use it when I want a shot and know that it's get it now or never. If I can come back and get the shot at a calmer time without flash, I will. I do use flash on occasion if I feel that the shot needs a little spark of light, but generally not. Flash is always used on a remote cord and diffused in some way, either with the wide-angle diffuser that's built into it, or by shooting through or bouncing it off of my multidisc.
As for shooting technique, a tripod is a must. I have two, but the one I use for flower shots allows me to splay the legs out and get the camera very low and/or allows me to reverse the column (I bought a short column to replace the one that came with the tripod) and hang the camera upside down. I use a ball head with a quick release. I also almost always use a remote release and frequently use mirror lock up. It's amazing how many images I've ruined because I moved the camera by pushing the shutter button or vibration from the mirror cause the slightest blur.
But above all, getting flower shots just requires a lot of patience. Hope all of this rambling helps.
Gary
I've also had great success with a trick Don Bevis shared. You can get thin bamboo sticks in bundles for just a couple of dollars at your local nursery. Get the longer ones. I always carry two of them with me and stick them in the ground so that they apply slight pressure to the plant stem. This cuts down considerably on the movement. Don't know where Don learned the trick, but it works.
Some use a tool called a Plamp. See it here (http://www.naturephotographers.net/gs/gswimplamp.html) I've never used one, though have been tempted. The fear I have is that any clamping device will damage the plant. I shoot a lot in the gardens of several neighbors and at the Chicago Botanic Garden and make it a point to never leave any trace of my having been there. In other words, no footprints in the flower beds, no damaged plants, nothing. Don's trick works so well because it steadies the plant without causing any damage. It doesn't always work, but it does so often enough that it's worth hauling the sticks around.
I've also read several threads on other sites where people describe using "tents" to both diffuse the light and to stop the wind. I don't have any links for solid techniques, but will try to find some. It's tempting, though yet another piece of gear to carry.
These days I make heavy use of my 5-in-1 disk for diffusion and reflection. I have the 22-in. Photoflex Multidisc (http://www.bhphotovideo.com/bnh/controller/home?O=breadCrumb&A=search&Q=&ci=6196), which I like a lot. It's excellent for a lot of light control purposes and sometimes serves as a good wind block. There are cheaper ones, but Kevin Sadler talked me into spending more money to get a quality product and I haven't regretted it.
When all else fails, I resort to flash to get the shot. I greatly dislike using flash and only use it when I want a shot and know that it's get it now or never. If I can come back and get the shot at a calmer time without flash, I will. I do use flash on occasion if I feel that the shot needs a little spark of light, but generally not. Flash is always used on a remote cord and diffused in some way, either with the wide-angle diffuser that's built into it, or by shooting through or bouncing it off of my multidisc.
As for shooting technique, a tripod is a must. I have two, but the one I use for flower shots allows me to splay the legs out and get the camera very low and/or allows me to reverse the column (I bought a short column to replace the one that came with the tripod) and hang the camera upside down. I use a ball head with a quick release. I also almost always use a remote release and frequently use mirror lock up. It's amazing how many images I've ruined because I moved the camera by pushing the shutter button or vibration from the mirror cause the slightest blur.
But above all, getting flower shots just requires a lot of patience. Hope all of this rambling helps.
Gary
2011 in this casual living room
harryom
01-18 01:01 PM
No actually its seems different from the receipt numbers which usually starts with SRC-xxxxxxxxxx
This one seems different like : PIT-xxxxxxxxxxTSC
It doesn't seems to work anywhere.
try entering that number here
https://egov.uscis.gov/cris/caseStatusSearchDisplay.do
BUT, I am assuming she gave u the Receipt number for online tracking, which you may already have from ur receipt notice...DOES it start with SRC or LIN?
This one seems different like : PIT-xxxxxxxxxxTSC
It doesn't seems to work anywhere.
try entering that number here
https://egov.uscis.gov/cris/caseStatusSearchDisplay.do
BUT, I am assuming she gave u the Receipt number for online tracking, which you may already have from ur receipt notice...DOES it start with SRC or LIN?
more...
cbpds
06-08 12:54 PM
What if someone returned the initial I94 but not the latest one because we attched the wrong I94 portion, will we need to send the new I94 after extension back to USCIS as well?
No, you are supposed to return all I-94s!!.
No, you are supposed to return all I-94s!!.
mishras
05-14 09:13 AM
Hi,
Received REF this week: for LCA vioation for a particular period.
I ve approved labor, 140 and EAD, still working on valid H1 with the same employer since 2003.
My employer missed filling LCA FOR 2006.
Please let me know if anyone else in the same boat, ANY COMMENT AND ADVICE WILL BE HELPFUL....
Received REF this week: for LCA vioation for a particular period.
I ve approved labor, 140 and EAD, still working on valid H1 with the same employer since 2003.
My employer missed filling LCA FOR 2006.
Please let me know if anyone else in the same boat, ANY COMMENT AND ADVICE WILL BE HELPFUL....
more...
maxy
09-27 09:47 AM
I have approved I140 notice ... i dont see A# can you pls help me find that number in approval notice (797)
2010 Interior design ideas - Living
chris
02-12 01:23 PM
You are right. My finger prints are expired and called several times and took info pass.
Same answer, " if IO thinks need FP, they will send. Wait for their decission". :mad:
Chris,
My case was very similar in last November, I did call them many times...but same old answer. but in last month they told me they did not work on my case because my fiinger prints were expired. they expire every 15 months, and without valid FP , case even will not pass standard "filter" criteria, and they don't consider it "ready to approve"
Looks like you sent your 485 on Jul 2007, assume your first FP was done before Aug 2007? if yes, it's expired. By any chance, did you do your 2nd FP?
Just my 2 cents.!
Regards,
-N
Same answer, " if IO thinks need FP, they will send. Wait for their decission". :mad:
Chris,
My case was very similar in last November, I did call them many times...but same old answer. but in last month they told me they did not work on my case because my fiinger prints were expired. they expire every 15 months, and without valid FP , case even will not pass standard "filter" criteria, and they don't consider it "ready to approve"
Looks like you sent your 485 on Jul 2007, assume your first FP was done before Aug 2007? if yes, it's expired. By any chance, did you do your 2nd FP?
Just my 2 cents.!
Regards,
-N
more...
Macaca
12-14 07:24 PM
A USCIS rule appears in a USCIS catalog or addendum. My International Student Advisor had a catalog of rules for F1, COPT and OPT. Everytime I did something out of the norm, I made a copy of the rules. I will keep these rules till I get the green card.
I was told that there is a 60 days period during which I can switch H1B between companies. To the best of my knowledge, it does not appear in a USCIS catalog: most persons say that it is true. My lawyer told me USCIS does not a rule for the period between company switching.
I was not aware of the 60 days grace period after OPT. Please let me know if you have seen it in a USCIS catalog.
I was told that consular approval can not be denied. I was close to being denied. The person before me was denied. Once you are out of the country, anything can happen. It depends on your country, your case and the officer handling the case.
The advantage of consular approval is that you get multiple entry visa.
Once again, a USCIS rule should appear in a USCIS catalog or addendum. The catalogs and addendums should be available online. Does anyone know about it?
Some things slip by but are noticed during the GC process.
Other concerns.
1. Kaplan was issuing I-20's in my time.
2. You are in status if your application is being processed by USCIS. (haven't seen the USCIS catalog)
I was told that there is a 60 days period during which I can switch H1B between companies. To the best of my knowledge, it does not appear in a USCIS catalog: most persons say that it is true. My lawyer told me USCIS does not a rule for the period between company switching.
I was not aware of the 60 days grace period after OPT. Please let me know if you have seen it in a USCIS catalog.
I was told that consular approval can not be denied. I was close to being denied. The person before me was denied. Once you are out of the country, anything can happen. It depends on your country, your case and the officer handling the case.
The advantage of consular approval is that you get multiple entry visa.
Once again, a USCIS rule should appear in a USCIS catalog or addendum. The catalogs and addendums should be available online. Does anyone know about it?
Some things slip by but are noticed during the GC process.
Other concerns.
1. Kaplan was issuing I-20's in my time.
2. You are in status if your application is being processed by USCIS. (haven't seen the USCIS catalog)
hair Futuristic Fireplace design in
valuablehurdle
05-06 11:48 PM
No they did not book any charges against me..How could they that? We did nothing illegal. It is just the whole episode took place ..It has shaken me and my family.
I donot know any lawyer.. Moreover, I am not sure whether it is advisable to go to a lawyer or not... not sure how major the issue is for them..
Moreover, will this affect my Green card process if I start suing these govt. people?
I am just confused...
I donot know any lawyer.. Moreover, I am not sure whether it is advisable to go to a lawyer or not... not sure how major the issue is for them..
Moreover, will this affect my Green card process if I start suing these govt. people?
I am just confused...
more...
luckylavs
05-14 04:16 PM
Is there any URL for reference? If so please provide it.
till Sept 2007. This is as read on another board.
till Sept 2007. This is as read on another board.
hot 15 Marks Spencer Living Room
i4u
12-22 10:07 AM
permfiling have you got your gc? approved and waiting for the card?
Trying to figure out if all the eb2 05 filers are cleared.
Trying to figure out if all the eb2 05 filers are cleared.
more...
house the fireplace this room
abd
03-05 10:18 AM
My I-140 got approved without RFE EB2 on 03/02/07.
RD 07/27/06
LUD 08/16/06
Approval Date 03/02/07.
Now joining endless wait for 485 filing.
RD 07/27/06
LUD 08/16/06
Approval Date 03/02/07.
Now joining endless wait for 485 filing.
tattoo Luxury euro Style Living Room
mammoy2k
11-13 05:49 PM
you will need to come back to atleast get AP approvals (AP expires every year), and if you are served a fingerprint notice, then come back for that. If you are going to be definately out for the next few years, another option is to do consular processing; talk to a lawyer it depends a lot on your specific case.
Due to work, I would be in the US at least once every quarter. So I dont think that finger printing or AP renewal is a problem, as long as I can get an address where these notices come.
Thanks for your response.
Due to work, I would be in the US at least once every quarter. So I dont think that finger printing or AP renewal is a problem, as long as I can get an address where these notices come.
Thanks for your response.
more...
pictures pics of our living room,
tabletpc
11-29 04:45 PM
Thanks everyone..i will send it 2m with bank draft in C$.
its better to have plan B...
its better to have plan B...
dresses Living Room, with wood burning
nat23
06-26 12:15 PM
There is expected to be another vote on Thursday evening to move towards limiting the debate on the Bill and a final vote is expected to be by Friday.
more...
makeup Christmas Living Room Design
kumarc123
11-06 03:44 PM
Thanks for your comment,
girlfriend house tours, living room
fromnaija
11-30 11:19 AM
I don't think you are correct. Portability applies after 6 months of I140 approval. But you can not use AC21 for job profile / labor zone change. So, I don't recommend you changing job title.
You are wrong! Portability applies after 485 has been pending for more than 180 days.
You are wrong! Portability applies after 485 has been pending for more than 180 days.
hairstyles living room decoration.
h1bemployee
02-26 05:14 PM
wandmaker ..Please read Phony postings and do not respond to these guys , they are just playing .. I m surprised senior members are not understanding the intend of the posts .
What can we help if he had problems with employer ? what can we help if he had h1-h4-h1 issues ? Every one just relax and stop replying .
I know every one wants to help others in our community but think twice before replying
I am not posting this for timepass.... This is a real problem....
My employer gave me Mar 12th as deadline.....
wandmaker... I am really sorry ...
here are the details:
when my employer got the RFE.. he asked me to send the following documents
# Previous company experience letters(from INdia)
#All Education certificates
# letter from the End client
# current resume
# w2 form
and he asked me to notarize all these documents. I sent all the requested documents except the end client letter, because my client said that its not their company policy to provide these type of letters.
There are two sub vendors between my client and employer. So I got a letter from one of the subvendor(he is in CA) that I am working in this company through them. In the letter he mentioned other sub vendor name also.
after sending these docs to USCIS ... My employer came back to me saying that he need more detailed documents.
# USCIS is doubting that I am working in CA not in NJ as the subvendor is from CA . But we provided the documents saying that I am working in NJ and I have filed my taxes from NJ only. I have my driving license from NJ.
# My employer filed H1b Amendment (filed in Aug 2007) saying that I work as a computer support specialist(eventhough I am working as a Systems Engineer) to support the salary pay. USCIS is saying that its not a H1B level job.
If I can tranafer my H1b to the main vendor , I will get a good pay and They can say I am working as Systems engineer which is h1b level job.
Can I transfer my H1 in this situation?. Please help.
What can we help if he had problems with employer ? what can we help if he had h1-h4-h1 issues ? Every one just relax and stop replying .
I know every one wants to help others in our community but think twice before replying
I am not posting this for timepass.... This is a real problem....
My employer gave me Mar 12th as deadline.....
wandmaker... I am really sorry ...
here are the details:
when my employer got the RFE.. he asked me to send the following documents
# Previous company experience letters(from INdia)
#All Education certificates
# letter from the End client
# current resume
# w2 form
and he asked me to notarize all these documents. I sent all the requested documents except the end client letter, because my client said that its not their company policy to provide these type of letters.
There are two sub vendors between my client and employer. So I got a letter from one of the subvendor(he is in CA) that I am working in this company through them. In the letter he mentioned other sub vendor name also.
after sending these docs to USCIS ... My employer came back to me saying that he need more detailed documents.
# USCIS is doubting that I am working in CA not in NJ as the subvendor is from CA . But we provided the documents saying that I am working in NJ and I have filed my taxes from NJ only. I have my driving license from NJ.
# My employer filed H1b Amendment (filed in Aug 2007) saying that I work as a computer support specialist(eventhough I am working as a Systems Engineer) to support the salary pay. USCIS is saying that its not a H1B level job.
If I can tranafer my H1b to the main vendor , I will get a good pay and They can say I am working as Systems engineer which is h1b level job.
Can I transfer my H1 in this situation?. Please help.
immilaw
09-17 05:58 PM
Folks,
I need some guidance from experienced folks particularly those who hold MBBS degree from India and are already in US in medical profession.
My brother has received MBBS about 5 years go and he is doing his practice in rural area. His wife is also MBBS and also holds a diploma on OB/GYN area.
My question is if they want to immigrate to US what are various paths they can follow to get here?
Thanks in advance.
PAN123
It looks like your brother is on J-1 Visa waiver program. My advise to him is to speak with an attorney.
I need some guidance from experienced folks particularly those who hold MBBS degree from India and are already in US in medical profession.
My brother has received MBBS about 5 years go and he is doing his practice in rural area. His wife is also MBBS and also holds a diploma on OB/GYN area.
My question is if they want to immigrate to US what are various paths they can follow to get here?
Thanks in advance.
PAN123
It looks like your brother is on J-1 Visa waiver program. My advise to him is to speak with an attorney.
p1234
09-26 10:39 AM
1)Incase my 485 application gets denied, can I start the process again and use the PD of my current application?
2) Can I move to and start the GC process with another company and use the current PD (I140 approved, 180 days passed), even if my current company revokes I140 and my Job description is very different --- I'm assuming yes.
3) What if I leave the country and come back after 2-3 years and reapply. Can I reuse the PD of my current application?
I was told by a friend that the priority date is mine forever since my I140 is approved. Is that correct?
Thanks
You are inviting trouble when you think of doing something out of the ordinary. I am not sure why people make their cases complicated. This is a very general comment and nothing specific about your case.
Heard from several friends about multiple labors (one EB2, another EB3), multiple I-140s. They are themselves not sure what is approved and what is pending approval. :). Have a friend who jumped job in May 07 on approved I140 + 3 yrs visa extn, then went back to previous one in July 07 and filed 485. After realizing EB3 is all messed up (thanks to 07/07), jumped to a third employer on AC21 (I think). There is yet another with a similar story.
We blame USCIS for everything (rightfully so), however we don't realize how much desi consulting firms and employees have exploited the system and added to the processing delays, for easy money.
Forget PD reuse, people have been jumping jobs left and right on AC21 and getting it denied.
PD porting is possible but as others have pointed out, it is not exactly a best practice recommendation.
2) Can I move to and start the GC process with another company and use the current PD (I140 approved, 180 days passed), even if my current company revokes I140 and my Job description is very different --- I'm assuming yes.
3) What if I leave the country and come back after 2-3 years and reapply. Can I reuse the PD of my current application?
I was told by a friend that the priority date is mine forever since my I140 is approved. Is that correct?
Thanks
You are inviting trouble when you think of doing something out of the ordinary. I am not sure why people make their cases complicated. This is a very general comment and nothing specific about your case.
Heard from several friends about multiple labors (one EB2, another EB3), multiple I-140s. They are themselves not sure what is approved and what is pending approval. :). Have a friend who jumped job in May 07 on approved I140 + 3 yrs visa extn, then went back to previous one in July 07 and filed 485. After realizing EB3 is all messed up (thanks to 07/07), jumped to a third employer on AC21 (I think). There is yet another with a similar story.
We blame USCIS for everything (rightfully so), however we don't realize how much desi consulting firms and employees have exploited the system and added to the processing delays, for easy money.
Forget PD reuse, people have been jumping jobs left and right on AC21 and getting it denied.
PD porting is possible but as others have pointed out, it is not exactly a best practice recommendation.
No comments:
Post a Comment